HEATSINK TECHNOLOGY

PLATE FIN HEATSINK

You are here:
Plate Fin Heatsink

WHAT IS A PLATE FIN HEATSINK?

A Plate Fin Heatsink extracts heat by convection, and uses straight fins that run the entire length to maximize the surface area of the heatsink. The large fins create heat spreading so that more energy can be removed at the same temperature difference.  A variation of the straight fin heat sink is a cross cut heat sink where the straight fin heat sink is cut at regular intervals. A simple plate fin heatsink has seven independent geometric parameters that can be varied in any design: fin thickness, fin height, fin length, fin spacing, base length, base width, and thickness of the base plate.

A great resource for estimating the Plate Fin Heatsink Thermal Resistance can be found at this link. In this article it is shown that in order to select the appropriate heatsink it is important to know the maximum allowable heatsink thermal resistance. By knowing the case temperature, the power dissipation, and the thermal resistance at the module-to-heat sink interface the maximum allowable temperature at the heat sink attachment surface can be determined. A similar article shows how to estimate the pressure drop on a Plate Fin Heatsink, and can be found at this link.

Plate fin Heatsinks can be manufactured in various ways such as machined, extruded, cast, stamped, folded, or skived. Plate fin heatsinks are also used on the outside of mechanical housings and enclosures as they provide a simple solution that create no noise, or power consumption.

As a plate-fin heatsink manufacturer, we specialize in creating highly efficient cooling solutions for various industries. Plate-fin heatsinks are ideal for applications that require effective heat dissipation in limited space and are commonly used in electronics, aerospace, and automotive sectors. Our skilled engineers and technicians work closely with our clients to design and manufacture custom heatsinks that meet their needs and requirements. With years of experience and state-of-the-art technology, we are committed to delivering high-quality products that exceed our client’s expectations.

BGA Aluminum Heatsink

BGA Aluminum plate fin Heatsinks

Radian’s BGA Aluminum plate fin Heatsinks are high efficiency heatsink cooling products which are ideal for linear air-flow environments. A BGA Aluminum Plate Fin Heatsink extracts heat by convection, and uses straight fins that run the entire length to maximize the surface area of the heatsink. These BGA Heatsink devices mount with EZ Snap™ mounting clips and / or thermal tape to provide optimum cooling for various package sizes and airflow. These off-the-shelf, high efficiency heatsink solutions are easy to install and require no special board modifications or complex assemblies. The heatsinks are constructed of extruded aluminum for optimum heat transfer. Designed specifically for BGAs and other surface mount packages then finished with black anodize plating. The BGA heatsink size is matched to the nominal size of the chip, and custom heatsinks may be available for chip sizes not shown.

EZ Snap Clips

Ez Snap Mounting Clips are design specifically for processors and ball grid array (BGA) components. The clips attach the BGA Aluminum Plate Fin Heatsinks directly to the BGA component making use of the gap created by the ball grid array (BGA) between the component underside and PCB top surface. Therefore, the EZ Snap™ clips require no holes or modifications to the PCB. They also allow for easy rework of components with fast and easy installation and removal.

EZ Snap Clip Drawing

When selecting the correct clip, it is important to get a clip that is within the range of the nominal chip height. This is the chip height without the solder balls. If the nominal is not available on the chip datasheet just use (max + min)/2. Where a particular chip height is not available, the base of the BGA heatsink can be reduced to provide correct fitment. If there are any issues please contact our team to verify fitment size.

BGA Platefin Heatsinks

Radian has a wide range of BGA Aluminum Plate Fin Heatsinks that are available to ship within a few days. If a part or BGA heatsink size is not available online we can usually offer an alternative part, or modify a part in stock to fit your needs. For lower volumes, we can also precision machine a heatsink to fit our EZ-snap clip, and for larger volumes an extrusion can be made for your exact requirements.  Please contact us if you need help selecting the correct solution.

Radian Part NumberTypeMaterialStyleLength (mm)Width (mm)Height (mm)Theta SA (°C/W)at 200LFMTheta SA (°C/W) at 400LFMTheta SA (°C/W) at 600LFMStore
INH27001-15/2.6BGAAluminumPlate Fin22.126.914.64.22.62.1View
INH27001-18/2.6BGAAluminumPlate Fin22.126.917.63.52.21.8View
INH27001-23/2.6BGAAluminumPlate Fin22.126.922.92.71.71.4View
INH33001-15/2.6BGAAluminumPlate Fin27.232.314.63.11.91.5View
INH33001-18/2.6BGAAluminumPlate Fin27.232.317.62.61.61.3View
INH33001-23/2.6BGAAluminumPlate Fin27.232.322.921.31View
INH35001-15/2.6BGAAluminumPlate Fin2934.814.62.91.71.3View
INH35001-18/2.6BGAAluminumPlate Fin2934.817.62.41.41.1View
INH35001-23/2.6BGAAluminumPlate Fin2934.822.91.91.20.9View
INH40001-15/2.6BGAAluminumPlate Fin34.539.114.62.51.51.1View
INH40001-18/2.6BGAAluminumPlate Fin34.539.117.62.11.31View
INH40001-23/2.6BGAAluminumPlate Fin34.539.122.91.710.8View
INL19001-10/1.7BGAAluminumPlate Fin19199.55.714.173.57View
INL19001-13/1.7BGAAluminumPlate Fin191912.75.153.723.16View
INL19001-6/1.7BGAAluminumPlate Fin19196.36.264.583.97View
INL21001-10/1.7BGAAluminumPlate Fin21219.55.383.913.32View
INL21001-13/1.7BGAAluminumPlate Fin212112.74.833.432.91View
INL21001-6/1.7BGAAluminumPlate Fin21216.36.084.413.79View
INL23001-10/1.7BGAAluminumPlate Fin23239.55.013.673.06View
INL23001-13/1.7BGAAluminumPlate Fin232312.74.253.092.61View
INL23001-6/1.7BGAAluminumPlate Fin23236.35.774.283.63View
INL24001-10/1.7BGAAluminumPlate Fin24249.54.723.453.83View
INL24001-13/1.7BGAAluminumPlate Fin242412.74.052.892.39View
INL25001-10/1.7BGAAluminumPlate Fin25259.54.573.182.63View
INL25001-13/1.7BGAAluminumPlate Fin252512.73..82.642.15View
INL25001-6/1.7BGAAluminumPlate Fin25256.35.323.793.15View
INL27001-10/1.7BGAAluminumPlate Fin27279.54.2532.4View
INL27001-13/1.7BGAAluminumPlate Fin272712.73.52.41.86View
INL27001-6/1.7BGAAluminumPlate Fin27276.34.943.582.99View
INL29001-10/1.7BGAAluminumPlate Fin29299.53.952.662.18View
INL29001-13/1.7BGAAluminumPlate Fin292912.73.322.21.72View
INL29001-6/1.7BGAAluminumPlate Fin29296.34.623.232.73View
INL31001-10/1.7BGAAluminumPlate Fin31319.53.722.552.02View
INL31001-13/1.7BGAAluminumPlate Fin313112.73.12.021.56View
INL31001-6/1.7BGAAluminumPlate Fin31316.34.383.132.58View
INL33001-10/1.7BGAAluminumPlate Fin33339.53.432.251.72View
INL33001-13/1.7BGAAluminumPlate Fin333312.72.791.731.28View
INL33001-6/1.7BGAAluminumPlate Fin33336.34.122.832.27View
INL35001-10/1.7BGAAluminumPlate Fin35359.53.152.011.49View
INL35001-13/1.7BGAAluminumPlate Fin353512.72.51.561.1View
INL35001-6/1.7BGAAluminumPlate Fin35356.33.852.481.92View
INL37.5001-10/1.7BGAAluminumPlate Fin37.537.59.52.91.751.34View
INL37.5001-13/1.7BGAAluminumPlate Fin37.537.512.72.271.310.98View
INL40001-10/1.7BGAAluminumPlate Fin40409.52.731.681.22View
INL40001-13/1.7BGAAluminumPlate Fin404012.72.161.250.88View
INL40001-6/1.7BGAAluminumPlate Fin40406.33.262.081.59View
INL42.5001-10/1.7BGAAluminumPlate Fin42.542.59.52.611.611.18View
INL42.5001-13/1.7BGAAluminumPlate Fin42.542.512.72.141.20.83View
INL42.5001-6/1.7BGAAluminumPlate Fin42.542.56.33.152.011.54View
INL45001-10/1.7BGAAluminumPlate Fin45459.52.451.471.12View
INL45001-13/1.7BGAAluminumPlate Fin454512.71.971.110.8View
INL45001-6/1.7BGAAluminumPlate Fin45456.32.931.871.44View
DC Platefin Heatsink

DC Platefin Heatsink

Radian’s DC Platefin Heatsink designs are constructed of die cast aluminum and are ideal for omni directional airflow or convection environments. These off-the-shelf, high efficiency heatsink solutions are easy to install with four M3 mounting screws ranging from 4-8mm in length, and can also be used with pushpins.

These Plate Fin heatsinks may be packaged with optional hard-ware mounting kits and thermal interface pads to facilitate installation of the heatsinks directly to the dc/dc converters.

Features:

  • High efficiency round pin design provide low pressure-drop characteristics
  • Constructed of aluminum for optimum heat transfer
  • Plate Fin designs are ideal for omni directional airflow environment
  • Designed specifically for DC/DC Converters and other baseplate packages
  • Finished with black anodize plating
  • Selected hardware mounting kit and thermal interface pad options are pre-packaged at the factory

Platefin Heatsinks with screws

Radian’s Plate Fin heatsink designs are constructed of die cast aluminum and are ideal for omni directional airflow or convection environments. These off-the-shelf, high efficiency heatsink solutions are easy to install with four M3 mounting screws ranging from 4-8mm in length.

PartTypeStyleMaterialLength (mm)Width (mm)Height (mm)Theta SA (°C/W) at 200LFMTheta SA (°C/W) at 400LFMTheta SA (°C/W) at 600LFMPart
HS1568EBPushpinPlatefinAluminum57.936.811.42.21.31View
HS1574EBPushpinPlatefinAluminum57.936.822.90.90.60.5View
HS1576EBDCDCPlatefinAluminum6157.911.41.40.80.6View
HS1579EBPushpinPlatefinAluminum6157.95.82.71.71.3View
HS1592EBDCDCPlatefinAluminum116.86111.41.20.70.5View
HS1594EBDCDCPlatefinAluminum116.86122.90.70.40.3View

Standard BGA sizes

Custom Colors

Custom Designs

VERSATILITY WITH PLATE FIN HEATSINKS